Sauna cube 3 x 5 m with lounge

Frames.

This sauna cube is made from two connected frames: 3286 x 3286 mm + 3286 x 2286 mm. The frame is made from glue-laminated spruce beams. The frame consists of a bottom frame (100 x 160 mm), columns (140 x 140 mm), top frame (140 x 200 mm) and withstands 183 kg/m2 roof load.

The walls.

The 1000 x 2200 mm walls are made of spruce wood. The light, golden-white spruce are ideal for Cubes’ construction designs. 

Standard full-panel wall. 

Wall frame 45 x 45 mm, the panel covered with 96 x 12 mm inside and outside 145 x 18 mm horizontal spruce cladding boards.

Insulated full panel wall.

Insulation – 50 mm (stone wool). Wall frame 45 x 45 mm, the panel covered with inside 96 x 12 mm and outside 145 x 18 mm horizontal spruce cladding boards.

The roof.

The roof panels are built with double rafters construction and covered with 18 x 145 mm finishing boards. This construction withstands 183 kg/m2. Cube’s roof is 2853  mm high and 1.310 (2.29%) slope. MIDA SELF KSK is used for the roof covering, its self-adhesive elastomeric bitumen membrane covering the entire surface. Installation of the rolled roofing is a quick, simple, and safe way to cover all Cube. All you must do is unroll, attach with nails, remove the protective film, and press.

Inside sauna: Sauna benches are made from deciduous wood; The  Aluminum sliding door system  (3 rails) is 3000 x 2000 mm.   Wooden door for shower (from spruce) – 990 x 2195 mm; Glassdoor for sauna room – 698 x 1855 mm.

Aluminum sliding doors system Alutech.

Sliding parts are framed with aluminum frames, manufactured from a ‘’cold’’ single-chamber of aluminum profiles with non-insulating gaskets. The sliding of the aluminum frame is made so that the entire structure is stable. Frames wheels are designed for attachment to the motion and have aluminum profiles for vertical and horizontal adjustment providing a particularly easy movement of moving parts. The sealing brush prevents dust from entering the structure and compensates for vibration in the wind. All moving parts are very easy to remove and put back, so there is no problem with cleaning glass from the outside. In the closed position, the system has automatically locked and unlocked positions. Handles and locks are built into the aluminum profile, so during the opening, the glass always remains clean.